WARRANTY REGISTRATION

Warranty Registration Form

Name:
Address:
Home Number:
Business Number:
Mobile Number:
Email:
Cabinet Model:
Cabinet Serial No:
Place of Purchase:
Date of Purchase:
9 + 1 =
LEAVE BLANK!!!!
 I have read and understood the terms and conditions of warranty and accept that my warranty will be null and void if my Vintec Transtherm wine cabinet has not been installed to the manufacturers specifications. If a service call is arranged and the findings are that the installation is at fault, I acknowledge that I am responsible for the service call charge.


Vintec Australia provides a full 2 year warranty from the date of purchase on all our wine cabinets. Please keep your receipt of date of purchase for verification purposes. Please complete the information below and click on the ‘submit’ button to validate your warranty.

Conditions of Warranty:

Vintec 30 bottle series

The small 30 bottle unit is not to be built in; they need total ventilation as they are not equipped with front venting. Free standing only.

Vintec 40 bottle series
The 40 bottle models, although equipped with front venting, require a minimum cut of 615mm, 1cm gap on both sides and top and 4cm behind. A vent is required in the upper back wall or in the upper side wall. If a kickboard is to be used it will need a grill to allow adequate in and out flow of air.

Vintec 50 bottle series
The 50 bottle models, although equipped with front venting, require a minimum cut of 626mm, 1cm gap on both sides and top and 4cm behind. A vent is required in the upper back wall or in the upper side wall. If a kickboard is to be used it will need a grill to allow adequate in and out flow of air.